BusanKorea · Пусан
The journey begins at Korea’s gateway port. The link to Vladivostok crosses the East Sea by ship.
EuroExpress brings Interpipe KLW railway wheels and axles from Ukraine into Korea, machines them to local specification and delivers them. Along the route those wheels travel, we are building rail logistics across Eurasia.
From the port of Busan to Vladivostok, through the Siberian taiga and past Lake Baikal, over the Urals to Moscow and Kyiv, then on to Berlin, Paris and London. Scroll and the globe follows.
The journey begins at Korea’s gateway port. The link to Vladivostok crosses the East Sea by ship.
The eastern end of the Trans-Siberian Railway — 9,289 km of track to Moscow start here.
Under endless conifers and the aurora, 1,520 mm broad gauge crosses the continent.
The line follows the southern shore of Baikal, the deepest lake on Earth.
Crossing the Urals, the line leaves Asia and enters Europe.
The western terminus of the Trans-Siberian, where the lines toward Europe branch off.
Where Interpipe KLW wheels and axles are forged, heat-treated and precision-machined — the start of the EuroExpress supply chain.
At the Polish border, 1,520 mm broad gauge meets 1,435 mm standard gauge — a gateway every continental rail shipment must pass.
Through the heart of Western Europe, where passenger and freight networks converge.
Under the Strait of Dover through the Channel Tunnel to London — one line, begun in Busan, complete.
Note: the routes shown on the map and in the film illustrate the Eurasian rail logistics corridor EuroExpress is developing. They do not indicate scheduled service over the entire route today; operating conditions on each section depend on the international situation.
From Busan to London — the rail journey EuroExpress is building, in one short film.
Interpipe is a Ukrainian steel and pipe producer; KLW is its railway product brand. Wheels and axles are forged, heat-treated and precision-machined at the Dnipro plant, and EuroExpress supplies them into the Korean market.
INTERPIPEWheels and axles carry the full load of the vehicle and absorb its braking forces. Only products traceable from raw material through heat treatment belong on a railway.
Forged wheels for locomotives, passenger cars, freight wagons and EMUs. Profile and grade are selected for the vehicle type and service conditions.
The shaft that carries the wheels and transmits rotation. Both powered and trailing axles are handled.
Wheels press-fitted onto axles and supplied as complete wheelsets, machined and assembled in Korea.
The Dnipro plant runs from forging press to heat-treatment furnace to automated machining line within a single building. The photographs below were taken by EuroExpress during a plant visit.






One continuous chain from plant to delivery. Documentation and inspection records must follow the product at every step before it can enter service.
Wheels and axles are forged, heat-treated and precision-machined at the Interpipe KLW plant in Dnipro.
Dimensions, material grade and non-destructive test results are verified; goods ship with their certificates.
Shipment to Korea via European ports, with customs clearance and transport scheduling managed together.
Additional machining and wheelset assembly to the specification of the Korean vehicle.
Delivery to rolling stock builders and operators, with the full traceability file handed over.
To bring in a single wheel type, EuroExpress has had to work the corridor between Ukraine and Korea end to end. Turning that corridor into a service of its own is the next step.
Vladivostok to Moscow and on into Europe — we are evaluating multimodal routings combined with the sea link.
Under evaluationAn alternative route from China’s eastern ports through Kazakhstan to the European rail network.
Under evaluationThrough the Bering Strait and along Russia’s Arctic coast to European ports — a long-term option we follow.
Long-term watchRelationships with local manufacturers and forwarders let us handle cargo in both directions.
We design transport knowing the packing, securing and inspection requirements of heavy industrial parts.
We have handled the paperwork, inspection and transport of parts made in 1,520 mm countries for standard-gauge markets.
A railway component specialist established in 2018. Our business covers the manufacture, import and distribution of rolling stock components, industrial machinery and trade, and R&D consulting.
| Legal name | EuroExpress Co., Ltd. (주식회사 유로익스프레스) |
|---|---|
| Established | 10 October 2018 |
| Place of business | 94, Hwaseong-ro 1616beon-gil, Bibong-myeon, Hwaseong-si, Gyeonggi-do, Republic of Korea |
| Business type | Manufacturing · wholesale & retail · trade · services |
| Scope | Rolling stock components, railway electronic equipment, industrial machinery, R&D consulting |
| Main products | Railway wheels · axles · wheelsets |
Tell us the vehicle type, the line it runs on, and the specification and quantity you need, and we will come back with available specifications and lead times. Logistics partnership inquiries reach the same address.